Hydraulic Jack HM series-YI-LIFT

Hydraulic Jack HM series

YI-LIFT hydraulic jacks for repairs, maintenance and installation of heavy machines
● Compact and stable construction.
● Can be used in any position.
● Housing revolves 360 degrees.
● Lowering speed can be accurately adjusted.
● Protected against overloading.
● Pump lever is removable.
● According to CE and US standard USA ASME/ANSI B30.1.1986.

CAUTIONS
● To avoid possible personal injury or damage to equipment
● Do not exceed the maximum load capacity of the jack.
● Do not add additional load to a lifted load.
● Do not use in unstable or hazardous positions.
● Unit must be used on flat surfaces able to carry the load.
● The load must be stable during lifting.
● An unstable load may cause the jack or load to slip.
● Do not use jack(s) if damaged, altered or in poor condition.
● Do not lift people or loads with people on them.

● Do not lift at the end of the toe. Fully engage the load with the toe.

Type		HM50	HM100	HM250
Capacity	(tonne)	5	10	25
Lifting Range of Foot	(mm)	25-230	30-260	58-273
Lifting Range of Head	(mm)	368-573	420-650	505-720
Max. Lever Force	(kg)	38	40	40
Net Weight	(kg)	25	35	102

More Products

Steel Jack HAS Series

Steel Jack HVS Series

Safety Ratchet Crank